12
AUTO SLEEP FUNCTIONS
8. Turn the soldering iron temperature adjustment knob, to wake the
soldering iron from its sleep mode
I. Activating Hot Air Gun Auto-Sleep Mode
The hot air gun’s SLEEP mode can be activated by following the
set of procedures below:
1. Follow System Setting procedures 1 to 6.
2. Adjust system selection menu to Set 002, then turn the hot air
gun knob to off position .
3. If successful the display “A1” would show “###t” indicating hot
air gun sleep timer setting is being set.
4. Adjust the sleep timer with the air flow adjustment knob “A2”,
Sleep timer is adjustable from 1 to 60 minutes with “OFFt”
signifying sleep timer is turned off.
5. Save the selected timer settings and exit from the sleep timer
adjustment menu by turning the soldering iron function
temperature knob to off position.
6. If the sleep mode is activated the sleep timer will start counting
down once the hot air gun function is activated.
7. When the sleep timer expires, the system will start cooling down
the hot air gun by blowing air at maximum intensity while the
display shows a flashing OFF to signify hot air gun is currently
preparing to go into sleep mode. Once hot air gun actual
temperature goes below 90 degrees, the display “A1” would
show “ - - - - “ four dashes indicating hot air gun is now in sleep
mode.
8. Turn the hot air gun temperature adjustment knob to wake the
hot air gun from its sleep mode,
