8
IMPORTANT REMINDERS:
1. Make sure the equipment is placed on a flat stable surface
and all the heat-generating components placed on their re-
spective holders or stands.
2. Ensure all function switches are OFF prior to reworking.
3. Ensure all terminal connections are properly secured.
IMPORTANT:
Please refer to the
CONTROL PANEL GUIDE
page
for buttons and display panel directory.
OPERATING GUIDELINES
D. INITIAL PROCEDURES
1. Plug the device to the main power source using the power cord
provided in the package.
2. Make sure all function switches are in the off position, to do this turn
soldering iron and hot air set temperature knob counter clockwise until
a click is heard.
3. Make sure all terminal connections are properly secured, Power up
the device by activating the main power switch.
4. The display panels, A1 and B1 will temporarily show the product name
in a scrolling manner and then display “OFF” on all rows once the
scroll is finished. The system will remain at this state until the user
activates a function.
E. HOT AIR GUN
1. Follow the initial procedures above, “A. INITIAL PROCEDURES”.
2. To activate the Hot air gun function turn the Hot Air gun set
temperature knob clockwise until a click is heard.
3. The system will immediately start to blow air and increase the air
temperature according to the set values of knob A2 for airflow and
knob A3 for set temperature. The set temperature values will be
reflected from the Hot Air Gun Air Temperature display A1.
