13
AUTO SLEEP FUNCTIONS
●
The soldering iron and desoldering gun operating temperature is
configurable between 200°C and 480°C
●
Because of the difference in the heating element and size of the
soldering iron tip and desoldering gun, the soldering iron will heat
up faster than the desoldering gun. This is normal and does not
have any impact on the system’s performance.
●
There will be a slight drop in temperature display once the trigger
of the desoldering gun is used. This is due to rapid intake of air in
which temperature is significantly cooler than the desoldering gun
tip. When the system detects this, it will automatically adjust the
temperature to compensate for the temperature difference.
E. Auto-Sleep Mode (Hot Air Gun)
The device has a built-in auto-sleep mode feature such that if the
Hot Air Gun sits on its handle and remained idle after a certain period
(the prefix of the display for Hot Air Gun air temperature will also
change from “H” to “L”) , the device will switch to sleep mode. This
mechanism is triggered by a countdown timer so when the time has
elapsed, the system will blow air (at room temperature) at maximum
rate in order to bring down the temperature. During this time, the prefix
of the display for Hot Air Gun air temperature will also change from “L”
to “C”. Once the temperature drops to approximately 90°C, the Hot Air
Gun will automatically stop and show an all-dash “ - - - - “display
indicating that the system is now on sleep mode.
F. Changing SLEEP Mode Timer (HOT AIR GUN)
By default, the system has 5-minute countdown time before the
hot air gun goes to sleep mode. This can be altered by the following
procedure.
IMPORTANT: Make sure the SMOKE ABSORBER switch
is deactivated while using the desoldering gun. Other-
wise, the desoldering gun will keep on sucking air in-
definitely.
