18
OPERATING GUIDELINES
D. AFTER REWORKING/EXTRACTION
1. Replace hot air gun into is holder. the heater LED would turn off
signifying it is now on cool down mode.
2. Let the hot air gun cool down automatically.
3. After the temperature has dropped down to
a safe level the unit would automatically
shut down the fan, the unit has now entered sleep mode.
4. The unit can now be shut down by turning the main power switch
to off .(“3” from the control panel)
E. COOL DOWN MODE
●
Whenever the Hand gun is placed on its holder the system
automatically goes into cool down mode.
●
Cool down mode turns off the heater but lets the fan blow air at
room temperature to cool down the unit.
●
The heater LED should automatically switch off whenever the hand
gun is placed in its holder.
●
The station would then go into sleep mode once the temperature
has gone down to a safe level.
●
Lifting the hot air gun from its holder would deactivate the cool
down mode.
E. SLEEP MODE
●
The system will be in sleep mode whenever the hand gun is placed
in its holder and the temperature is lower than 100°C .
●
Sleep mode turns off both the heater and the fan.
●
When the system is in sleep mode lifting the hot air gun from its
holder will activate the unit .
●
When the system is initially turned on the system is already in sleep
mode lift up the hot air gun to activate the device.
●
In sleep mode both the main unit LED and Heater LED are off.
Note:
The airflow can be
turned to the maximum
level for faster cool down
of the device.
7
Aoyue
936 规格
FUNCTIONS and FEATURES
●
ESD safe hand piece.
●
Auto cool down feature, unit shuts off heating element then
blows air at room temperature , when hot air gun is placed on its
dock.
●
Auto off feature, unit turns off heater and fan when not in use.
●
Overheat protection, heating element auto shuts off when
temperature rises over the maximum limit to protect the system
and its components.
●
Large control knobs for easy controls of temperature and air
flow.
●
Convection style heating allowing low pressure hot air to pass
target devices and concentrate on the solder joints.
●
Easy grip solder gun design, provides snug fit clasp and easy
control of hot air direction.
