10
TC5-2V2SA.rev.05
TC5-2V2SA
Stages 3 and 4 can operate as heating or cooling stages.
ð
Set switches # 6 and # 7 to
OFF
to
use both stages for cooling.
ð
Set switch # 6 to
ON
and switch # 7
to
OFF
to use Stage 4 for heating
and Stage 3 for cooling.
ð
Set switches # 6 and # 7 to
ON
to
use both stages for heating.
Note that if only one stage is used for heating, it must be Stage 4.
H
EATING / COOLING OPTION
6
7
ON
n
Set the selection knob to
STAGE 2 — OFFSET/BANDWIDTH
.
The offset is displayed, alternating with the letters "
OFT
".
n
Press the push-button twice. The currently selected motor type
flashes.
n
Use the adjustment knob to adjust the motor type to the desired value.
n
Return to the Stage 2 offset display by pressing the push-button
once again.
