English
---------------------------------------------------------------------------------
There are two modes for copying: go to Setting Mode to change setting
before using.
Copy
In this mode, the AD330 utilizes fast copying to record digital
data from the memory card to the DISC.
S-Copy
In this mode, after completing the copy work, the AD330 checks the
DISC to ensure all digital data has been recorded securely from the
memory card to the DISC.
Press the
“Left”
or
“Right”
button to choose Copy
mode. Press
“OK”
button, AD330 will burn the
Disc directly and show the copy status. If multiple
cards or devices are detected by AD330, it is
necessary to select device before burning.
The following image appears, showing the capacity of the memory card and
the Disc. While copying, you will be able to track the progress of the copy
work from the following image on the display.
Note:
1. Do not press any button or switch off the
power at this time, otherwise the data in the
memory card could be damaged or not copied
properly. We are not responsible for any loss
resulting from this operating error.
2.
The Copy (S-Copy) processing can’t cancel
or stop, please make sure the copy function
before starting.
3. The 12cm empty DVD Disc size is 4.7 GB, the 8cm empty DVD Disc
size is 1.4GB, the 12 cm empty CD Disc is 650MB. AD330 will reserve 5%
outside Disc track space to avoid Data loss.
4. The Copy function just shows the total sizes of card for copying,
remaining space size of Disc to burn, but can’t know status of all users’
Discs to determine the total number of Discs for copying.
18
Summary of Contents for Disc Steno AD330
Page 1: ......
