Abatidores de temperatura
18
50LIB061
9.5 GESTIÓN DE LA PRUEBA RELATIVA A LA COLOCACIÓN CORRECTA DE LA
SONDA DE NÚCLEO
Los ciclos de temperatura controlada están precedidos por una prueba de 2 fases para
controlar que se haya colocado correctamente la sonda de aguja.
La segunda fase se realiza solo si la primera no ha sido completada correctamente.
La primera fase se ha completado correctamente si la diferencia de la “temperatura detectada
por la sonda de aguja – la temperatura de la cámara" es superior a 5°C en al menos 3 de los 5
controles (los controles se realizan a intervalos de 10 segundos, considere la diferencia sin el
signo).
La segunda fase se completa correctamente si la diferencia de la “temperatura detectada por
la sonda de aguja – la temperatura de la cámara" es superior a 1°C respecto al control anterior,
en al menos 6 de los 8 controles (los controles se realizan cada 8 segundos). Si la prueba se ha
completado correctamente, iniciará el ciclo; si la prueba no se ha realizado correctamente, el
LED parpadeará y sonará el timbre durante 2 segundos.
Para iniciar el ciclo de temperatura controlada, presione la tecla BLAST CHILLING
(ENFRIAMIENTO RÁPIDO) o la tecla DEEP-FREEZING (CONGELACIÓN RÁPIDA).
Después de un 1 min de la aparición de la señal que indica que la prueba no ha sido
completada correctamente, el ciclo inicia con control de tiempo.
9.6 PUESTA EN MARCHA DEL PRE-ENFRIAMIENTO
Cada ciclo de funcionamiento puede ser precedido por la fase de pre-enfriamiento.
Funciona como ha sido indicado para iniciar el pre-enfriamiento:
•
Asegúrese de que el dispositivo se encuentra en el estado “on”.
•
Asegúrese de que no existen procedimientos en curso.
•
Mantenga pulsada la tecla BLAST CHILLING (ENFRIAMIENTO RÁPIDO) durante 1 segundo:
el
LED parpadeará.
Realice lo siguiente para cortar el pre-enfriamiento:
•
Mantenga pulsada la tecla BLAST CHILLING (ENFRIAMIENTO RÁPIDO) durante 1 segundo o
inicie un ciclo de funcionamiento.
Cuando la temperatura del armario llega a 5°C, sigue el pre-enfriamiento, el
LED permanece
encendido fijo y se activa el timbre durante 1 segundo.
9.7 CAMBIO DEL CICLO DE ESTERILIZACIÓN CON OZONO
(Solo para modelos con opción de esterilización con ozono)
Realice lo siguiente:
•
Asegúrese de que el dispositivo está en el estado "on" y que la puerta está cerrada.
•
Asegúrese de que el teclado no está bloqueado y que ningún procedimiento está en curso.
•
Mantenga pulsada la tecla AUXILIARY (AUXILIAR) durante 1 segundo: el LED se encenderá.
El generador de ozono se enciende durante 5 minutos, abriendo la puerta se apaga el
generador.
9.8 CALENTAMIENTO DE LA SONDA DE NÚCLEO
(Solo para modelos con opción de sonda de núcleo calentada)
Realice lo siguiente:
•
Asegúrese de que el dispositivo está en estado "on" o se encuentre en marcha el
almacenamiento y la puerta está abierta.
•
Asegúrese de que el teclado no está bloqueado y que ningún procedimiento está en curso.
•
Mantenga presionada la tecla AUXILIARY (AUXILIAR) durante 1 segundo: el
LED
parpadea y el LED AUX se encenderá.
La sonda de núcleo se calienta hasta que la temperatura detectada por la sonda de aguja
alcance los 40°C; cerrando la puerta se corta el calentamiento.
El timbre se activa durante 1 segundo cuando termina el calentamiento.
Summary of Contents for ASH05K
