12
Turning-on:
Turn on the switch on the back of the battery.
Manipulation:
To take out the battery, turn the key by 180°. Grip the
battery by its handle on the bottom of it and pull it out of the carrier.
Insertion of the battery is done in opposite order.
Ascertaining state of charge of the battery:
The state of charge of the battery can be read on the LED indicator
on the back of the battery. It is activated by a short press of the
button. Battery is fully charged if 4 diodes are glowing (3 green,
1 red). If only the red diode is on, the battery is almost completely
flat and it is necessary to recharge it.
Turning on:
Turn the battery on by pressing the
button on its upper part.
Manipulation:
To take out the battery out, turn
the key by 180°. Move the safety for
locking/unlocking of the lock towards the
handlebars, grip the battery on the upper part
and loosen it by pulling askew and upwards. To
insert the battery, first put in on the contacts
in its lower part and then press the upper part
until you hear the click of the lock’s latch, then
move the safety for locking/unlocking of the lock
towards the seat. Lock battery by turning the key.
Turning off:
Press and hold the button for
5 seconds to turn the battery off.
Ascertaining state of charge of the battery:
The battery has only simple indication via 3
colours of LED diodes – red for 0-20% capacity,
green for 20-80% and blue for 80-100%. The
display can provide more specific information.
CARRIER BATTERY
INTEGRATED BATTERY
(Dakotah)
(Tuwan MX1, Tuwan MX3, Tuwan MX5, Yamka MX1, Yamka MX3, Yamka MX5, Matto MX1, Matto MX3, Matto MX5, Matta
MX1, Matta MX3, Matta MX5, Wakan MX3, Wakan MX5, Wakita MX3, Wakita MX5, Tuwan E3, Tuwan E5, Yamka E3,
Yamka E5, Tate, Matto Tour E3, Matto Tour E5, Matta E7, Matta Tour E3, Matta Tour E5, Matta E7, Wakan Tour E3, Wakan
Tour E5, Wakita Tour E3, Wakita Tour E5)
lock
switch and
status of battery
safety
charging connector
STATE OF CHARGE
SWITCH
