55
9.
Keeping the length of the tape taut, carefully apply the tape to the seam until both sides are fixed to the
work surface.
10.
Press the tape along the seam to remove any air gaps.
11.
Repeat steps 6 through 10 until all seams are completely pieced together.
12.
Using the straight edge ruler, carefully trim the edges of the map at the seams (where the tape is affixed to
the workspace).
13.
Peel off the removable tape at the corners and the edges. You are now ready to display your multipage map.
Printing a Route and Directions
Street Atlas USA 2005 gives you the ability to print maps of your route and/or route directions.
Additionally, you can save your directions or along the way results in a text file. For more information, see
Saving
Route Directions as Text
on page 56.
To Print a Route
Use the following steps to print an existing route.
1.
Click the
tab and then click
Route
.
Note
: If you do not have a route in this Map File, the print route options are unavailable.
2.
Click the Setup button
to open the Print Setup dialog box and select a printer, change printer
properties, select paper size, and select paper orientation. Click
OK
when finished.
Note
: If the options are available under Printer Properties, set the graphics mode to use raster graphics and
set TrueType fonts to print as graphics.
3.
Under Options, select from one of the following choices:
•
Overview
—Provides an optimized map of your route and the route summary (trip distance, trip
time, start, total stops, and finish).