background image

- 1 -

Thank you for choosing our product.

This user manual contains information about proper and safe operation of the recorder. 

Read and understand this user manual before installation and operation of the recorder.

If you have any questions, consult a technician.

TABLE OF CONTENTS

1. OVERVIEW OF THE RECORDER

............................................................................ 2

2. CONTENTS OF THE SET

......................................................................................... 2

3. GENERAL SPECIFICATION

..................................................................................... 3

4. CASING DIMENSIONS AND EXTERNAL PARTS IDENTIFICATION

...................... 4

5. CONNECTING TO THE COMPUTER AND DRIVER INSTALLATION

..................... 4

6. SOFTWARE INSTALLATION

....................................................................................4

7. PARAMETERS ADJUSTMENT

.................................................................................5

8. OPERATION AND FEATURES OF SD/MMC CARD

................................................ 6

9. VIEWING RECORDED MEASUREMENTS AND EVENTS

...................................... 7

10. ALERT CONFIGURATION

...................................................................................... 7

11. LCD DISPLAY OPERATION MODES

..................................................................... 8

12. MESSAGES AND ERRORS — LED INDICATORS

................................................8

13. IMPORTANT OPERATIONAL NOTES

....................................................................8

14. REPLACING THE BATTERY

.................................................................................. 9

The producer reserves the right to make any changes in the construction and software of this product, which will not 
deteriorate the quality of the product.

Pay particular attention to texts marked with this sign 

!

Summary of Contents for AR232











Reviews: