11
11. DESCRIPTION OF DATA PRESENTATION ON THE LCD DISPLAY
The recorder enables presentation of the measurement data in various modes in accordance with the following
diagram:
Fig. 11.
A block diagram of the available measurement data presentation modes (the detailed descriptions are
provided in successive chapters)
As a default, the device is delivered with an empty list of measurement channels. In order to present the data, new
sensors/devices (radio and wired, chapter 12.5) must be added to the list. If the number of channels in a group
exceeds the maximum value that enables presentation of all the graphic element of a given view on the screen,
the view is automatically switched to the text mode.
11.1. UPPER AND LOWER STATUS BAR
The status bars can be seen in the upper and lower part of the display only in the measurement presentation
modes.
The meaning of the individual graphic elements is described below.
a)
lower status bar
Fig. 11.1.2.
Lower status bar
Object
Description [
and marking in the contents of the instructions
]
6
no USB connection with the computer
the USB port is
accessible for the
computer (device)
signaling of the operation
mode and the status of the
USB port (chapter 12.8, Table
12.8,
USB operation mode
parameter)
the USB port is connected to the computer
no USB memory,
do not connect to the
computer!
USB memory support
(host), chapter 13
USB memory (pendrive) was detected
7
measurement group name (up to 16 characters per group, taken from the
AR407.txt
file, chapters 12.4 and 12.5)
8
view of a measurement group (text only)
signaling of measurement data presentation
mode (type of view)
view of a measurement group (text and a bar graph)
view of a measurement group (text and an analog indicator)
none single measurement (chart)
9
[Tx/Rx]
- signaling of presence of serial transmission (via the RS485, a USB port or the Ethernet)
10
signaling of the touch screen and keypad lock (one of the
[F]
button functions), chapter 12.9
Summary of Contents for AR407
Page 32: ...32 21 USER S NOTES...