Diagnostics
Document No. D113-015
Page 64 of 77
Revision 1.9
Fourth Variable (FV)
Figure 5.18 - Channel Status – Trend
Once the source or sample rate has been modified, the
Apply
button must be clicked for the
changes to take effect. This will also result in the existing trend data being cleared. The Y axis
scale can be modified by adjusting the
Min
and
Max
value and clicking the
Refresh
button. To
automatically update the trend every second, the
Auto
check box can be selected.
5.4.
DEVICE LIST
The module supports scanning the channel to determine at which short address the field
device(s) are. The user can select the start and end address to minimize the scan time. Once
the scan is completed and a device is found the devices details will be displayed in the list as
shown below. When the user is using multiple devices on a single channel then more than
one device will be displayed in this list.
NOTE
: When multiple devices are used on a single channel then the user must
ensure that each device is at a unique address. The user can change the short
node address in the options by right-clicking on the device and selecting Write
Address.
