1
Instruction manual
MASK12PBRA
This wall bracket can be used with our MASK12 speaker or other compatible
speakers up to 40 kg. To install the MASK12 speaker on the bracket, remove
the center M10 bolt from the bottom of the speaker. Attach the pole mount
(supplied) securely by fastening the mount on the speaker.
Fix the wall plate on a sufficiently strong
wall using all 6 mounting holes. Always use
mounting hardware (not supplied) capable
of supporting the load safely. The speaker
arm can be swiveled over a 180° angle from
left to right and can be tilted down up to 20°
by turning the tilt screw. Mount the speaker
with the attached speaker pole mount on
the bracket and secure it by tightening the
lock screws.
