APCON, Inc.
52
A54-3144-XR • Rev B
Chapter 5. Configure the chassis
ACI-3144-XR Chassis User Manual
5. Repeat the steps above until the desired IP address is displayed.
6. When the desired IP address is displayed, press
ENTER
to confirm.The chassis verifies
the IP address and displays one of the following icons:
7. The
IPv6 Menu
is redisplayed. To save the IP address, press
DOWN
repeatedly until
the
Save Changes
menu option is marked on
IPv6 Menu,
and then press
ENTER
.
Configuration > LAN
n
IPv6 prefix
The following example sets the LAN1 IPv6 netmask on the chassis.
1. On the
IPv6 Menu
, press
DOWN
repeatedly until the
LAN1 Prefix
menu is selected,
and then press
ENTER
. The following screen is displayed:
2. To set the desired netmask, use the
CANCEL
and
ENTER
buttons to position the cursor
over the first digit you want to change.
• To move the cursor to the right, press
ENTER
.
• To move the cursor to the left, press
CANCEL
.
3. When the cursor is positioned over a digit you want to change, press either
UP
or
DOWN
repeatedly to increase or decrease the value.
4. When the desired digit is displayed, press
ENTER
to confirm the setting and move the
cursor to the right over the next digit.
5. Repeat the steps above until the desired netmask is displayed.
6. When the desired netmask is displayed, press
ENTER
repeatedly until the cursor
moves all the way to the right and the
IPv6 Menu
is redisplayed.
7. To save the netmask, press
DOWN
repeatedly until the
Save Changes
menu option is
marked on
IPv6 Menu
, and then press
ENTER
.
The chassis verifies the netmask and displays one of the following icons:
The IP address is valid.
The IP address is not valid.
The IP address is valid.
The IP address is not valid.
