APCON, Inc.
42
A54-3144-XR • Rev B
Chapter 5. Configure the chassis
ACI-3144-XR Chassis User Manual
Status Menu
To access the
Status Menu
, press
DOWN
to scroll through the sub-menus on the
Main Menu until the
Status
menu option is selected, then press
ENTER
.
The
Status
Menu
lists the following sub-menus:
Details about these options are provided in the sections that follow.
Status > System Status
The
Switch Status
screen displays the status of components installed in the chassis. The
number of blades and transceivers installed may vary.
To access the
Switch Status
screen, press
DOWN
to scroll through the sub-menus on the
Main Menu
until the
System
Status
menu option is selected, then press
ENTER
. The
following screen is displayed:
The status information displayed varies by the number of and type of blades and power
supplies installed in the chassis. In the example shown here, the ACI-3072-XR contains a
maximum of two power supplies.
Status Sub-menu
Description
System Status (see
)
Displays operational details about the switch,
including alarm status.
Failover Status (see
)
Provides a status for failover.
Online Users (see
)
Displays log-in information, including the number
of log-in attempts and currently logged-in users
Component/Status
Description
Power n (Supply)
Indicates operational status of the specified power
supply, where
n
is a value from 1 to 4.
Good (
green
)
The power supply is functioning normally.
FAIL (
red
)
The power supply failed.
Generates an audible alarm, if enabled.
