APE 50 Operation And Maintenance Manual Download

Page: 7 / 29

12345678901234567890123456

1234567890123456789012345

7032 SOUTH 196th - KENT, WA. 98032 - (206) 872-0141 / FAX (206) 872-8710

OPERATION / MAINTENANCE MANUAL

MODEL 50/75 AUGER

Warranty

American Piledriving Equipment, Inc. STANDARD WARRANTY

American Piledriving Equipment, Inc. (APE) warrants new products sold by it to be

free from defects in material or workmanship for a period of one year after the date

of delivery to the first user and subject to the following conditions:

APE's obligation and liability under this WARRANTY is expressly limited to repairing

or replacing at APE's option, any parts which appear to APE upon inspection to

have been defective in material or workmanship. Such parts shall be provided at

no cost to the user, at the business establishment of APE or the authorized APE

distributor of the product during regular working hours.

This WARRANTY, shall not

apply to component parts or accessories of products not manufactured by

APE

and which carry the warranty of the manufacturer thereof, or to normal mainte-

nance (such as engine tune-up) or normal maintenance parts (such as filters).

Replacement or repair parts installed in the product covered by this WARRANTY

are warranted only for the remainder of the warranty as if such parts were original

components of said product. AMERICAN PILEDRIVING EQUIPMENT, INC. makes

no other warranty, expressed or implied and makes no warranty of merchantability

of fitness for any particular purpose.

APE's obligation under this WARRANTY shall not include any transportation

charges, costs of installation, duty, taxes or any other charges whatsoever, or

any liability for direct, indirect, incidental or consequential damage or delay. If

requested by APE, products or parts for which a warranty claim is made are to be

returned transportation prepaid to APE. Any improper use, including operation after

discovery of defective or worn parts, operation beyond rated capacity, substitution

of any parts whatsoever, or parts not approved by APE or any alteration or repair

by others in such manner as in APE's judgment affects the product materially and

adversely, shall void this warranty.

ANY TYPE OF WELDING ON EQUIPMENT

WILL VOID THE WARRANTY

NO EMPLOYEE OR REPRESENTATIVE IS AUTHORIZED TO CHANGE THIS

WARRANTY IN ANY WAY OR GRANT ANY OTHER WARRANTY UNLESS SUCH CHANGE

IS MADE IN WRITING AND SIGNED BY AN OFFICER OF APE, INC.

1234567890123456789012345678

Page vii

Summary of Contents for 50






























Search results

Summary of Contents for 50

Reviews:

Related manuals for 50

Brands by name

Popular brands

APE 50, Operation And Maintenance Manual

Search results

Summary of Contents for 50

Reviews:

Related manuals for 50

Brands by name

Popular brands