mode.
If water in boiler is higher than 75
℃，
DSP1 and DSP2 will flash PUMP OUT. When
the water is lower than 75
℃，
it shows PUMP OUT meaning water is automatically pumped
to water tank from boiler. After the pumping is finished, it will go to standby mode
automatically.
11.2 End program without steam function (grill and pizza)
After cooking (pizza and grill function) is finished, it beeps three times, and shows End.
And it beeps 3 times every 30 seconds in 5 minutes. End will flash on display. After 5
minutes, it goes to standby mode. If you open the oven door or press PT2, it will go to
standby mode too.
12
、
DEMON FUNCTION AND CHILD LOCK
12.1 Demon function
When Steam oven is in OFF (closed) mode, it does not show time, but show only
clock icon “
”. Press PT1 until it shows OFF SHO on DSP1 and DSP2, which
means demo function is not activated. Turn PT1 to activate demo function ON SHO,
press Pt2 to confirm the setting.
On demo function, the oven does not work including all heating elements. only light
and cooling fan work under demo function. If you hope to use the oven, please set it as
OFF SHO mode.
Under “ON SHOW” mode, the oven will show “ON SHO”and the current function
alternately every 5 seconds, no matter what function is set.
Note: demo function has the memory function, If power is cut, demo function continues to
work after power is on.
12.2 child lock
When Steam oven is in OFF (closed) mode, it does not show time, but show only
clock icon “
”. Press PT1 until it shows OFF SHO on DSP1 and DSP2.Turn PT1 to
activate child lock function ON Bloc. When it shows ON bLOC on DSP1 and DSP2,
press PT2 to confirm the setting, and it shows icon “
”
。
On demo function, the oven does not work including all heating elements. Only light
and cooling fan work under demo function. If you hope to use the oven, please set it as
OFF SHO mode.
Under child lock system, it will show BLOC for three seconds whether you press
PT1 or PT2, and it returns to previous setting.
Note: Child lock function has the memory function, if power is cut; child lock function
continues to work after power is on.
12.3 Unlock
To unlock temporarily, press PT1 until “
” on DSP4 disappear. Then you could
choose any function or revise parameter. After 2 minutes, it goes back to child lock
function.It will go back to child lock function automatically.
To unlock permanently, go into child lock function, refer the instruction manual to unlock.
13
、
DESCALING
Warning: Descaling will take 45 minutes and oven can not be interrupted for your
safety.
