1
、
TECHNICAL SPECIFICATION
2
、
UNPACKING AND INSTALLATION
2.1 Before the installation
1
、
Machine shell to be checked without deformation caused by pressure or force.
2
、
Check that the oven door closes correctly and the inside of the door and front oven
panel are not damaged.
3
、
Metal net of the oven door is not bend or out of shape.
4
、
The power cord is broken or loose.
5
、
The data on the oven nameplate is compliance with the relevant regulations.
6
、
After unpacking the package. Separate the various packaging materials on type and
send them to the nearest separate disposal center.
When steam oven is damaged or operation is unmoral, unplug the steam oven
to cut off power supply.
Only authorized personnel should carry out servicing.
2.2 Installation
Only a qualified person in compliance with the instructions provided must install the
appliance .the manufacturer declines all responsibility for improper installation, which may
harm persons and animals and damage property.
Important: - The power supply to the appliance must be cut off before any adjustments or
maintenance work is done on it;
-
Air duct is supposed to use in Ventilation.
-
The ac power supply should be 220-240 V, 50 Hz, the minimum 1
3
A distribution
circuit fuse, or at least 1
3A
distribution circuit breaker
If we put the steam oven into cabinet, the cabinet material should be insulated, and
the clearance between the edge of the cabinet and the oven should be over 500mm for
ventilation.
MODEL
AMSG35SS
CAPACITY
（
L
）
35L
VOLTAGE(V)
220
-
240
FREQUENCE
（
Hz
）
50
CIRCUIT BREAKER(A)
16
POWER(STEAM)
（
W
）
1600-1900
POWER(STEAM OVEN)
（
W
）
1400
-
1700
PRODUCT DIMENSION
（
mm
）
594×530×455
PACKAGE SIZE
（
mm
）
675×611×525
GROSS/NET WEIGHT
（
Kg
）
33.0/29.0
