8
、
FUNCTIONS
8.1 Menu
Under standby state, presses PT2 to boot function choose, turn PT2 to choose function.
The chosen function will be shown on DSP3.Preset temperature and parameter will be
shown on DSP2.
Note
：
1
、
When the cavity temperature reaches the preset temperature, temperature
icon “
” will stop flashing and become light.
2
、
Press PT1, PT2 at the same time during working process, current cavity
temperature will be shown on DSP2.
8.2 Steam Functions
-Under standby state, press PT2 boot option, rotate PT2 selected steam function “
”
DSP1 display default time 10 minutes, DSP2 display default steam temperature 100
℃
.
-Press PT1, rotate PT1 to set temperature.
-Press PT1 again and turn PT1 to set cooking time. After cooking time is set, Press PT2,
the appliance begins to work. Steam function icon “
” and temperature icon “
”
will flash, working time icon “
” and high water level icon “
” will light.
Temperature range: 40-100
℃
The longest working time: 90:00
8.3 Meat cooking (Automatically)
-Choose steamed meat function “
”,DSP1 display default time 30:00 minutes, DSP2
default steam temperature is 100
℃
and program C1 shine alternately
-Press PT1, rotate PT1 set procedures
-Press PT1 again and turn PT1 to set cooking time. After cooking time is set, Press PT2,
the appliance begins to work. Steam meat function icon “
” and temperature icon
“
” will flash, working time icon “
” and high water level icon “
” will light.
Notice: Temperature of foods will flash alternately.
Different meats have different temperature; you can refer to the following table.
Program
Type of meat
Temperature
（℃）
Time
（
min
）
Container
Level
C1
Chicken Breast
100
30
Perforated
2
C2
Smoked Pork Loin
100
45
Perforated
2
C3
Turkey Escalope
100
20
Perforated
2
C4
Pork Filet Whole
100
25
Perforated
2
C5
Vienna Sausages
90
15
Perforated
2
8.4 Fish cooking (Automatically)
-Choose steamed fish function “
”,DSP1 display default time 25:00 minutes, DSP2
default steam temperature is 80
℃
and program b1 shine alternately
-Press PT1, rotate PT1 set procedures.
-Press PT1 again and turn PT1 to set cooking time. After cooking time is set, Press PT2,
