10
Using the Boost function
Actived the boost function
1. Select the heating zone by touching the zone select key (A).
2. Touching the boost control key(F)
,the zone indicator show “P” and
the power reach Max.
Cancel the Boost function
1. Touching the relevant zone select key(A) that you wish to cancel.
•You have not placed a pan on the correct cooking zone or,
•The pan you’re using is not suitable for induction cooking or,
•The pan is too small or not properly centred on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 1 minutes if no suitable pan is
placed on it.
When you have finished cooking
alternately with the heat
If the display flashes
setting
This means that:
Touching the relevant zone select key(A) that you wish to switch off.
Press the “-”key will decrease the power to “0” level,
or press the "+" and "-"at the same time, the power level will decrease to
0 straight away.
Beware of hot surfaces
will show which cooking zone is hot to touch. It will disappear when the
surface has cooled down to a safe temperature. It can also be used as an
energy saving function if you want to heat further pans, use the hotplate that i s
still hot.
B
Summary of Contents for UBINO60LC
Page 23: ...23 Notes ...
