APEN GROUP SPA reserves the right to make changes deemed to be required to its products or documentation
AH-New
condensing air handling unit
6
code HG0310.05GB ed.A-2010
AH
7
code HG0310.05GB ed.A-2010
AH
HG0310.00_IM 0001
HG0310.00_IM 0002
HG0310.00_IM 0003
HG0310.00_IM 0004
HG0310.00_IM 0005
HG0310.00_IM 0006
2.8.
Transport and handling
The air handling unit (AHU) is supplied with its own base or
placed and properly fixed to a wooden pallet.
Unload the heater from the truck and move it to the site of
installation by using means of transport suitable for the shape
and for the weight of the load.
Any lifting and transport operations must be carried out by
skilled staff, adequately trained and informed on the working
procedures and safety regulations. Instructions in this Manual
shall have to be followed when handling the air handling unit.
Based on their weight and dimensions, heaters can be lifted
with lift trucks or wheel-mounted crane.
In the first case, use fork extensions as long as heater width.
SINGLE models
MULTIPLE models
MULTIPLE models
In case of special applications, it is possible to assemble
MULTIPLE models directly on site (request to be specified
when ordering the machine), positioning one module at a time,
as shown below.
