C
H AP TER
1. Q
UI CK
S
TAR T
G
UI DE
1–8
070-20000340-01 Rev A
Step 12. Configure Subscriber Hosts
A.
Connect the subscriber’s computer(s) to the 10/100Base-T interface on the Indoor
Unit, using a straight Ethernet cable for connection to a hub or a crossover Ether-
net cable for connection directly to a computer.
B.
Typically, the only other thing necessary to connect a subscriber host computer
to the PacketWave network and beyond is to configure the host’s TCP/IP to obtain
its IP address using DHCP. Instructions should be available using the computer’s
online help
