Apex Digital Cirrus X2 Instructions Download

Page: 4 / 4

The key mechanism will now give you manual control of the remote valve as shown above

The keys have a small movement of approx 1mm

Re fit the burner tray and fix in place the sub frame as shown below

If you using the back panel kit for this installation it should be fitted now by following the instructuons that are
provided with the panel

Fig 1

Fig 2

To Increase Flame

Press to Decrease flame

Power

Button

Summary of Contents for Cirrus X2

Page 1: ...om the fire box by the following steps shown below Fig 2 Remove 6 screws Fig 3 Remove access panel Fig 4 Disconect gas supply Fig 5 Carefully remove the burner tray by lifting the back of tray first Fig 1 Carefully lift the the ceramic base boards to reveal the burner screws ...

Page 2: ...bracket and retain the screws 2 Fold the new bracket to the shape shown 3 Fit the bracket using the new location holes as below 4 Fit the isiolation valbve to the bracket Now fit the remote control valve key operating mechanism and power supply as follows Place the screws into the holes of the key mechanism and fix to the bracket on the remote control valve ...

Page 3: ... panel as shown in Fig 2 Plug the power supply cord into the USB socket on the side of the remote control valve ensuring the cord is routed away from any hot surfaces and the grommet provided is used to prevent chafing to the cord when passing through the fire box Fig 1 Fig 2 ...

Page 4: ...mall movement of approx 1mm Re fit the burner tray and fix in place the sub frame as shown below If you using the back panel kit for this installation it should be fitted now by following the instructuons that are provided with the panel Fig 1 Fig 2 To Increase Flame Press to Decrease flame Power Button ...