DIMENSIONS
F LA ME HE A TE R
Dimensions in mm
Model
Width
（
W1
）
Width
（
W2
）
Height
（
H1
）
Height
（
H2
）
Depth
（
D
）
Mantel opening size
Mantel Minimum
Depth
（
RD
）
Width
（
OW
）
Height
（
OH
）
With
spacer
frame
No
spacer
frame
E112
510
405
605
552
207
420
565
75
110
Spacer frames to reduce the minimum rebate depth to 75 mm and a full depth flat wall
fix spacer can be purchased from your supplier.
INSTALLATION
NOTE:
Do NOT use this Electric Fireplace if any part has been under water. Immediately
call a qualified service technician to inspect and to replace any part of the
electrical system if necessary. Keep plastic wrapping away from children.
Lift fire into position in any fireplace to prevent scratching the hearth panel;
z
Unpacking the heater carefully, make sure that the appliance is intact with no
signs of damage caused by transport. If in doubt, do not use the appliance
and contact an authorised service centre. Please save the original packaging
as this may be required in the event of a service complaint with the product.
z
Do not place the electric fire directly on carpets. This to avoid possible
discolouring caused by the heat or blockage of air inlets.
z
Make sure that the plug or switched fused spur is accessible after the electric
fire is fitted.
z
If the power cord is damaged, it must be repaired by the manufacturer, its
authorised service centre or professional person.
z
Before connecting the appliance make sure that its rating corresponds to that
of the mains supply and the fuse is the correct rating.
z
The appliance should be located close to a suitable mains socket to enable
connection. The electrical socket must be easily accessible to allow
disconnection.
