12
PRIOR TO OPERATION
•
Read this manual in its entirety and follow ALL safety procedures
•
Check all lubrication points and fluid levels. See page- for specific lubrication
points and fluid specifications.
•
Inspect all fasteners for tightness with the power turned off.
Obey all of the safety labels on the applicator. They are provided for your protection. If
any labels are removed, damaged or made unreadable in any way, contact Apex for a
replacement.
If the applicator is equipped with any options, read and understand ALL of the safety
precautions and warnings for that particular option BEFORE performing maintenance or
operating.
GENERAL PRECAUTIONS
1. Empty the tank daily to prevent stored material from producing
hazardous gases. Some gases produced by stored material
can be harmful or deadly.
2. Never enter the tank of the applicator before performing the
proper lockout/ tagout procedure. Use lockout/ tagout
procedure 29CFR1910.147 during inspection or maintenance.
3. Tag the engine operating area to show that the applicator is
being serviced. Use lockout/ tagout procedure
29CFR1910.147 during inspection or maintenance.
4. Stop all action, read and observe the operation and safety
manual in its entirety, following all safety precautions before
operating or performing maintenance.
5. Do not operate the applicator without all guards in place.
Always use safe operating practices.
6. Hydraulic fluid is under high pressure. Always use safe
operating procedure.
7. Keep a sufficient distance away from all electrical power lines.
Summary of Contents for XA1200
Page 11: ...11...
