15
•
Disconnect the engine Apex microcontroller. Locate the microcontroller plug,
above the battery.
1. Slide the red button (item 1) to the left.
2. Depress the button (item 2) to allow the
clasp to raise.
3. Raise the clasp to remove the controller
connector.
•
Disconnect both connectors on the engine ECU.
1. Depress item 1 to allow the clasp (item 2) to raise.
2. Raise the clasp to remove the connector from the Microcontroller.
OPERATION SAFETY/ THE OPERATOR
Sound Levels/ Hearing Protection
The noise level of the applicator at the operator station, unshielded, is 86dBA.
Take the following precautions:
•
Always keep doors and windows of the tow vehicle closed.
•
Use ANSI S3 19-1975 approved hearing protectors with a noise reduction rating
(NPR) of 25dB (A).
•
Ear plugs (disposable or re-useable)
Avoid Power Lines
Serious injury or death can result from contact with electric lines. Never
move any part of the equipment closer than 10 ft (3 meters) plus twice
the line insulator length to an electric line. Use a signal person to guide
the operator. Use shrouds or insulators as necessary.
Discharge Electrocution
Do not aim the discharge spray toward power lines, transformers or
other high voltage electrical conductors. Also, do not aim the discharge
spray towards people, animals or anything other than the intended
application area.
1
2
3
Summary of Contents for XA1200
Page 11: ...11...
