6
Part Names and Function
■
>
Product
●
～
～
P d
F
Product Features
Ideal Setting Data
①
The data preprogrammed into the POWER FC is a result of hard engine dyno testing and is
meant to maintain the power and torque levels of the factory engine. However units should
be tuned by a professional tuner and require initial setting modification BEFORE use on
engines with ANY modifications.
High resolution MAP
②
The POWER FC utilizes a high resolution 20 x 20 maps for maximum flexibility
Warning Function
③
The engine check lamp will illuminate a warning when: the injectors are at maximum
capacity, detonation occurs, or when the pressure sensor is at maximum capacity.
To check for burnt out bulbs, the engine check lamp will illuminate for 2 seconds when the
・
ignition key is turned ON.
The lamp will illuminate when the pressure sensor is at maximum capacity
・
During detonantion, the lamp will flash 3 times in 0.1 second intervals
・
The lamp will flash for 0.5 seconds when the injectors are at maximum capacity
・
Data Modification
④
The separately sold FC Commander allows the fuel and ignition maps to be changed easily
Memory Function
⑤
The POWER FC does not need an external power source to retain data. The data will
remain in the memory even without the vehicle battery. The FC COMMANDER (separately
sold) will allow the user to initialize all of the data to factory settings if desired.
www.R33-GTR.org
