32
Select
Select
Select
２
.
Select [TH-Point] in the
setting menu
１
.
Select [Setting] in the
main menu
or
Main menu
Setting menu
or
(1)
Select the throttle opening Lo/Hi
Operate the left/right part of the center switch
to select the throttle opening Lo or Hi. The
selected numeric value is displayed as a
reversing display.
(2)
Select a numeric value
Select a numeric value and press the upper or
lower part of the center switch or turn the
rotary switch counterclockwise or clockwise to
increase or decrease the numeric value.
When the rotary switch is turned clockwise,
the numeric value is increased. When this
switch is turned counterclockwise, the numeric
value is decreased.
(3) End the setting
Select [Pr] in the popup menu after pressing
the center pushbutton or press the left part of
the center switch at throttle opening Lo
selection and the setting menu will reappear.
■
Setting range
The value in parentheses is the initial value
Lo
【
Throttle opening, small
】
0
〜
98 (10)
[％]
Hi
【
Throttle opening, large
】
1
〜
99 (50)
[％]
※
Settable by 1% increments
Increase/decrease
or
【
Setting Menu
】→【
TH-Point
】
Throttle opening setting
or
Pr
Nx
3.
The throttle opening setting mode is set
or
Pr
Enter
Enter
Go back
Go back
