44
Select
Select
Select
【
etc.
】→【
Sensor Type
】
Sensor type and sensor number setting
The sensor type and the sensor number (sensor characteristic) are set according to the
vehicle. This item is indispensable for initial setup.
２
.
Select [Sensor Type] in the
etc. menu
１
.
Select [etc.] in the
main menu
or
Main menu
etc. menu
or
Pr
or
Nx
3.
The sensor type setting mode is set
or
Pr
For the sensor types, refer to the Wiring diagram by model on the separate sheet.
The sensor number setting varies depending on the selected sensor type
.
●
Hot-Wire or Pressure selection
･･･････
P45
●
Flap or Karman selection
････････････
P49
Sensor selection
(1)
Select a sensor type
Press the upper or lower part of the center switch
and turn the rotary switch counterclockwise or
clockwise to select a sensor type. The selected
item is displayed as a reversing display. When
the rotary switch is turned clockwise, the cursor
is moved upward. When this switch is turned
counterclockwise, the cursor is moved downward.
(2)
Go to the sensor number setting screen
Select [Nx] in the popup menu after pressing the
center pushbutton or press the right part of the
center switch, and the sensor number setting
screen will appear.
(3) End the setting
Select [Pr] in the popup menu after pressing the
center pushbutton or press the left part of the
center switch, and the etc. menu will reappear.
Decide
Go back
Select
Go back
or
