46
At In selection
At out
selection
At out
selection
At In selection
Select
５
.
Set the sensor output calculation method
※
Pressing the upper part of the center switch provides the same function as turning the rotary
switch clockwise, and pressing the lower part of the center switch provides the same function as
turning the rotary counterclockwise.
For almost all the models except Skyline GT-R, In 1 and Out 1 are set.
For the setting method, refer to the setting examples shown on and after the next page.
or
Pr
Changeover
or
Go back
(1)
Select In or Out
Operate the left or right part of the center switch
to select In or Out. The selected numeric value is
displayed as a reversing display.
(2)
Set the calculation method
Select a numeric value and press the upper or
lower part of the center switch or turn the rotary
switch counterclockwise or clockwise to select a
calculation method.
When the rotary switch is turned clockwise, the
operation is the same as when the upper part of
the center switch is pressed.
(3) End the setting
Select [Pr] in the popup menu after pressing the
center pushbutton or press the left part of the
center switch at In selection, and the sensor
number setting screen will reappear.
Calculation method operation diagram
