49
Select
●
When the sensor type is Flap or Karman
※
For the sensor numbers, refer to the Wiring diagram by model on
the separate sheet.
1. For Flap
2. For Karman
※
When Karman is selected, sensor number setting is not required.
(1)
Select Karman
Press the upper or lower part of the center switch
or turn the rotary switch counterclockwise or
clockwise to select Karman. The selected item is
displayed as a reversing display. When the rotary
switch is turned clockwise, the cursor is moved
upward. When this switch is turned
counterclockwise, the cursor is moved downward.
(2) End the setting
Select [Pr] in the popup menu after pressing the
center pushbutton or press the left part of the
center switch, and the etc. menu will reappear.
or
Increase/decrease
(1)
Set the sensor number
Press the upper or lower part of the center
switch or turn the rotary switch counterclockwise
or clockwise to increase or decrease the
numeric value. When the rotary switch is turned
clockwise, the numeric value is increased.
When this switch is turned counterclockwise,
the numeric value is decreased.
(2) End the setting
Select [Pr] in the popup menu after pressing
the center pushbutton or press the left part of
the center switch at In selection, and the sensor
type setting screen will reappear.
or
