53
Select
Select
(1)
Select an item
Press the upper or lower part of the center switch
and turn the rotary switch counterclockwise or
clockwise to select an item to set a numeric
value. The selected item is displayed as a
reversing display. When the rotary switch is
turned clockwise, the cursor is moved upward.
When this switch is turned counterclockwise, the
cursor is moved downward.
(2)
Set a numeric value
Select a numeric value and press the right part of
the center to set the numeric value. Press the
upper or lower part of the center switch and turn
the rotary switch counterclockwise or clockwise to
increase or decrease the numeric value. When
the rotary switch is turned clockwise, the numeric
number is increased. When this switch is turned
counterclockwise, the numeric value is decreased
⇒
For setting another item
Operate the left part of the center switch and
repeat steps (1) and (2).
(3) End the setting
Select [Pr] in the popup menu after pressing the
center pushbutton or press the left part of the
center switch at item selection, and the etc. menu
will reappear.
【
etc.
】→【
Disp Scale
】
Display scale setting
２
.
Select [Disp Scale] in the
etc. mode
１
.
Select [etc.] in the
main menu
Main menu
or
Pr
3.
The display scale setting mode is set
or
Pr
etc. menu
A graphic display and a analog display in the monitor mode are made and a graph scale in
the two-dimensional trace mode is set. As a pressure display, one of kg/cm
2
and kPa can
be selected.
or
Nx
■
Setting range
The value in parentheses is the initial value
Pr :
760
〜
-100
[
mmHg
]
/ 0,
+
1.0,
+
2.0
[ｋｇ
/
ｃ㎡]
0,
+
100,
+
200
[
kPa
]
(760mmHg)
Ne :
6000
〜
10000
[
rpm
]
(6000)
Cr :
±
3,
±
6
,±
9,
±
15,
±
30
[%] (±
3
)
or
Decide
Decide
Go back
Go back
or
Select
Select
