58
Select
Select
Select
(1)
Select an item
Press the left or right part of the center switch to
select an item to set a numeric value. The selected
item is displayed as a reversing display.
(2)
Set a numeric value
Select a numeric value and press the upper or
lower part of the center switch or turn the rotary
switch counterclockwise or clockwise to increase or
decrease the numeric value. As the numeric value
is increased, it becomes brighter. As the numeric
value is decreased, it becomes darker. When the
rotary switch is turned clockwise, the numeric
number is increased. When this switch is turned
counterclockwise, the numeric value is decreased
.
(3) End the setting
Select [Pr] in the popup menu after pressing the
center pushbutton or press the left part of the
center switch at [Day] or press the left part of the
center switch at [Nig], and the etc. menu will
reappear.
3.
The VFD brightness adjustment mode is set
or
Pr
etc. menu
or
or
Pr
Nx
２
.
Select [VFD Bright] in the
etc. menu
１
.
Select [etc.] in the
main menu
Main menu
【
etc.
】→【
VFD Bright
】
VFD brightness adjustment
or
Decide
Decide
Go back
Go back
Increase/decrease
or
In this product, the VFD brightness is automatically adjusted according to the outside
lightness by using a built-in optical sensor. It is supposed that the item [Day] is for the
brightness of the daytime (bright time), [Dim] is for the brightness of the evening time
(dim time), and [Nig] is for the brightness of the nighttime (dark time)
Make an adjustment, for example, when the light is dazzling at night. Usually, any
change is not required.
