B
OPERATION
B.2
Drive Module Presets
B.2
Drive Module Presets
Device
Preset name and ID
for DSP input
Output
affected to DSP input
1 bloc =
1 DSP input
DSP input
name
Figure 4: Main screen
The DMS48 uses Drive Module presets, which are defined as a number of outputs driven
from one DSP input. This system allows for better flexibility and greater functionality when
loading and storing presets. Drive modules allow for a less processor centric and more speaker
orientated system design. A drive module is the processing provided by one Input DSP, and a
number of outputs, which are associated with one-another by means of routing. For example,
if Input DSP B is routed to outputs 3 and 4, then this is a 2-way drive module with input DSP
B forming the master control, and output DSP 3 and 4 providing the driver-related control.
Overall, this forms the control typically for one loudspeaker sub-system.
The Input DSP
parameters then control the Drive Module, and the Drive Module control panel in the PWAPG
application is then used for control and monitoring of this sub-system. Outputs assigned DSP
Input letter Presets are Drive Module centric, in that a preset will change only the parameters
in the given Drive Module (determined by which Input the preset is recalled to).
Note:
DSP inputs are not the same as physical inputs.
The DMS48 has four audio
inputs and four DSP inputs. This is a matrix mixing system where any physical inputs, be
they analogue, AES3 or networked audio feeds, can drive any number of DSP inputs.
Also see Snapshots on page 24
B.3
Navigation and Parameters Edition
A
OUT
IN
User Manual DMS48
V1.1
15
Summary of Contents for DMS48
