ARCHMI-8XX(P)H Series User Manual
43
23. COM2:
(Type DB9M),
Rear serial port, standard DB9 Male serial port is provided to
make a direct connection to serial devices.
Pin#
Signal Name
1
DCD# (Data Carrier Detect)
2
RXD (Received Data)
3
TXD (Transmit Data)
4
DTR (Data Terminal Ready)
5
Ground
6
DSR (Data Set Ready)
7
RTS (Request To Send)
8
CTS (Clear To Send)
9
JP2 select Setting (RI/5V/12V)
24. LED1, LED2, LED3, LED4 (option):
LED1: LED STATUS. Green LED for Power Good status.
LED2: LED STATUS. Green LED for Touch Power Status.
LED3: LED STATUS. Green LED for EC Power status.
LED4: LED STATUS. Green LED for Motherboard Standby Power Good status.
25. SATA_P(option):
(2.5mm Pitch 1x2 box Pin Header), One onboard 5V output connector is
reserved to provide power for SATA devices.
Pin#
Signal Name
1
+DC5V
2
Ground
Note:
Output current of the connector must not be above 1A.
Model
SATA_P (Wafer)
SBC-7111-N2930-4G
○
SBC-7111-N2930-4G-SW
○
SBC-7111-N2930P-4G
○
