11
•
As a rule, when pulling Aplicom cables through inlets or tubes during installation, it is not allowed to pull directly from connectors. Instead the pull must be
directed to cable itself.
•
The place of installation should be safe from detergents and corrosive substances.
•
Do not install unit in places were safety may be compromised.
•
Ensure CAN connection and limitations from vehicle manufacturer or dealer.
•
For replacing the internal battery see document
K520015 A9 battery replacement guide
available on Aplicom extranet. DO NOT USE OTHER
BATTERIES THAN APLICOM DELIVERED. RISK OF EXPLOSION.
•
DISCONNECT ALL CABLES FROM A9 connectors before changing internal battery.
•
If the unit is to be transported by airplane, disconnect the Power /IO cable connector from A9 during the transport. Disconnecting the cable disconnect the
A9 internal battery from the A9 internal electronics for safety.
•
If A9 PRO A is used, install external communication antenna minimum 1 metres from the device itself.
Battery safety instruction
CAUTION: Failure to observe the safety instructions can result in fire, electric shock and other injuries or damage to the device or other property.
The housing is made of plastic with sensitive electronic components and batteries inside.
Safety instructions:
• Do not pierce, break, crush or cut the device or the battery!
• Do not expose the device or the battery to an open flame or extremely high temperatures!
• Do not expose the device or the battery to liquids or extremely low air pressure!
• Do not drop the device or the battery!
• Do not try to change the battery in the device!
• The device or the battery must be recycled or disposed of separately from household waste!
