Integrated Circuits Inc.
aP23KWC8D - USB Writer User Guide
Page 9 of 19
6/10/2015
k. Select the signal timing. (16ms or 65us)
l. When power on, immediately play SW0 one time.
m. Set volume control function.( if not select means do not need to use the volume level control function)
m-1.Volume Warp : Volume level increase to the max then begin from the level 1.
*Select disable :
When volume is adjusted to the top, use M1 to decrease the volume.
When volume is adjusted to the ground, use M0 to increase the volume
*Select enable :
When volume is adjusted to the top, it will restart from level 1.
When volume is adjusted to the ground, it will restart from level 16.
m-1.Vol Level : Select 16 level volume control. (There are three options: 16 level/8 level/4 level)
