14
CAUTION:
Be careful if you have to move the trailer when it is in the locked position be-
cause it could tip over.
UNFOLDING THE TRAILER
To securely open your
ADAPT-X
TM
trailer and avoid any damages to it, please
carefully follow the instructions below.
OBSERVATION:
First you must attach the tongue, then open the front section followed by the
rear section. The unfolding operations must be performed on a flat surface.
1. TONGUE AND OPENING THE FRONT SECTION
To open the front section follow the instructions below. If necessary, consult
Figures 13
to
15
.
Before opening the trailer
, check to see if all the hitch pins are in position and if
the trailer is tipped onto the stops at the rear section.
Fig. 13
1.1.
Attach the tongue to the main body of the trailer by inserting it into its
corresponding section. Put the tongue pin in the corresponding pin holes.
Fig. 12
and
Fig. 14
CAUTION:
If the tongue is not attached and you attempt to use the front section the trail-
er could tip over toward the front.
1.2.
Remove the tipping pin and the hitch pins from the front section.
1.3.
Stand in front of the trailer and unfold the front section.
1.4.
Insert the tipping pin.
Fig. 7
1.5.
Connect the electrical wiring harness between the front section and
the tongue.