Mini-MP
– User’s Guide
APOGEE ELECTRONICS
2
APOGEE ELECTRONICS
Mini-MP
– User’s Guide
3
(1) Connect
the included power supply to the
POWER
connection on the back of the Mini-MP and to
a convenient AC Outlet. As the power supply’s AC input voltage is automatically sensed, it may be
connected to virtually any AC power outlet found worldwide without concern for voltage settings or
fuse ratings.
(2) Connect either a microphone or instrument to either the
L
(Left) or
R
(Right)
IN
connection on the rear
panel. If using a microphone that requires phantom power, press and hold the corresponding 48v
switch to the right until the blue led comes on .
(3) Connect the corresponding
OUT
connection to an analog line input such as the Apogee Rosetta 800
A/D converter
(4) Set the
POWER
switch to
ST
(Stereo).
(5) Set the
OUTPUT
control to
0
.
(6) While the connected sound source is active, turn the corresponding
GAIN
control clockwise until the
+6
LED lights; if the
CLIP
LED lights, adjust the
GAIN
control counter-clockwise.
Getting Started Quickly
1
2
3
6
5
4
