background image

13 

 

8  

Warranty and Technical Support 

 

For all other technical questions please call your local distributor or Apollo Sprayers Inc. for technical 
support. 
 
For spraying technique visit 

www.hvlptanning.com 

 
Technical Support: Available Monday-Friday, 8am-4:30pm, PST. 
Apollo Sprayers International, Inc. 
1030 Joshua Way 
Vista, CA 92081 
Voice: 760-727-8300 Toll Free: 888-900-4857 Fax: 760-727-9325 
Email: 

apollo@hvlp.com 

 

Warranty for HAPPY-MIST™ Tanning System

 

Six Month Limited Warranty 

 

This machine and Equipment is WARRANTED by 

APOLLO SPRAYERS INTERNATIONAL INC. 

for a total period of SIX 

MONTHS from the ORIGINAL date of purchase by the ORIGINAL PURCHASER. Proof of purchase to be included and all 
SHIPPING CHARGES to be pre-paid. 

APOLLO SPRAYERS INTERNATIONAL, INC.

 upon examination of the machine/equipment will 

replace or repair

 at their 

discretion any defects in material or workmanship. 
 

This WARRANTY does NOT include:  miss-use, damage, neglect, alterations, disassembled equipment or modifications, 
lack of maintenance, cleaning, water damage to electrical parts and INCORRECT VOLTAGE CONNECTION.  This 
WARRANTY is in lieu of all other express warranties, any WARRANTY implied by law, including but not limited to implied 
warranties of merchantability or fitness, is excluded to the maximum extent permitted by law and, if not excludable, it  is 
limited to the duration of the express Warranty.  No representative or person is authorized to extend this Warranty or to 
create for 

APOLLO SPRAYERS INTERNATIONAL, INC.

 any other liability in connection with the sale of any 

APOLLO 

SPRAYERS product.  APOLLO SPRAYERS INTERNATIONAL, INC.

 shall not be liable for any consequential, incidental, 

or special damages of any kind directly or indirectly resulting from breach of any express or implied Warranty.  Some States 
do allow the exclusion of limitation of incidental or consequential damages or limitations on the length of any Warranty so 
that the above limitations and exclusions may not apply to you; however, to the maximum extent permitted under applicable 
law, the only rights and remedies shall be to obtain a replacement for any defective product.  This Warranty gives you 
specific legal rights and you may also have other rights which vary from state to state and country to country. 

 

 

WARNING:

 

 This product can expose you to chemicals including Chromium, 

which is known to the State of California to cause cancer and birth defects or other 

reproductive harm.  For more information go to www.P65Warnings.ca.gov.

 

 

Summary of Contents for Happy-Mist














Reviews: