background image

 

13 

 

 

 

 9   

Warranty and Technical Support 

 

 

 

 

For all other technical questions please call your local distributor or Apollo Sprayers Inc. for technical 

support. 

 

 

 

USA Technical Support:  Available Monday-Friday, 8am-4:00pm, PST.  
Apollo Sprayers International, Inc. 

 

1030 Joshua Way 

 

Vista, CA 92081 

 

Voice: 760-727-8300  

 

Toll Free: 888-900-4857  

 

Fax: 760-727-9325 

 

Email: 

Apollo@hvlp.com 

 

 

 

Apollo Sprayers International, Inc. One Year Limited Warranty

 

 

 

This machine and Equipment is WARRANTED by 

APOLLO SPRAYERS INTERNATIONAL INC. 

for 

 

a total period of ONE YEAR from the ORIGINAL date of purchase by the ORIGINAL PURCHASER. 

Proof of purchase to be included and all SHIPPING CHARGES to be pre-paid. 

 

APOLLO SPRAYERS INTERNATIONAL, INC. 

upon examination of the machine/equipment will 

replace or repair 

at their discretion any defects in material or workmanship. This WARRANTY does 

NOT include: miss-use, damage, neglect, alterations, disassembled equipment or modifications, lack 
of maintenance, cleaning, water damage to electrical parts and INCORRECT VOLTAGE 
CONNECTION. This WARRANTY is in lieu of all other express warranties, any WARRANTY implied 
by law, including but not limited to implied warranties of merchantability or fitness, is excluded to the 
maximum extent permitted by law and, if not excludable, it is limited to the duration of the express 
Warranty. No representative or person is authorized to extend this Warranty or to create for 

APOLLO 

 

SPRAYERS INTERNATIONAL, INC. 

any other liability in connection with the sale of any 

APOLLO 

SPRAYERS product. APOLLO SPRAYERS INTERNATIONAL, INC. 

shall not be liable for any 

 

consequential, incidental, or special damages of any kind directly or indirectly resulting from breach of 

any express or implied Warranty. Some States do allow the exclusion of limitation of incidental or 
consequential damages or limitations on the length of any Warranty so that the above limitations and 
exclusions may not apply to you; however, to the maximum extent permitted under applicable law, the 
only rights and remedies shall be to obtain a replacement for any defective product. This Warranty 
gives you specific legal rights and you may also have other rights which vary from state to state and 
country to country.

  

 

 

 

WARNING:

  This product can expose you to chemicals including Chromium, which 

is known to the State of California to cause cancer and birth defects or other 

reproductive harm.  For more information go to www.P65Warnings.ca.gov.

 

 

 

Summary of Contents for Mini-Mist PRO Deluxe T100














Reviews: