3
1
General Safety Information:
Read all instructions and safety precautions before operating the unit.
THIS INDICATES A CONDITION THAT WILL CAUSE SERIOUS INJURY OR LOSS
OF LIFE IF THE WARNING IS IGNORED.
THIS INDICATES A CONDITION THAT COULD CAUSE SERIOUS INJURY OR
LOSS OF LIFE IF THE WARNING IS IGNORED.
THIS INDICATES A CONDITION THAT MAY CAUSE MINOR INJURY AND/OR
EQUIPMENT/PROPERTY DAMAGE.
•
Risk of fire or explosion! Solvent and paint fumes can explode or ignite, causing severe
injury and property damage.
•
Paints and solvents containing HALOGENATED HYDROCARBONS can react explosively
with aluminum. Always check the product’s label before using these materials in the
unit.
•
Hazardous vapors: Paint, solvents, insecticides and other materials may be harmful if
inhaled, causing severe nausea, fainting or poisoning.
•
Make sure the room is well ventilated. Avoid all ignition sources, such as static electricity
sparks, open flames, hot objects, sparks from connecting and disconnecting power
cords, and working light switches.
•
Follow the material and solvent manufacturers’ safety precautions and warnings. Do not
use liquids with flash points less than 100 degrees Fahrenheit (38 degrees Celsius).
•
Static electricity can be produced by HVLP spraying. Make sure any electrically
conductive object being sprayed is grounded to prevent static sparking. The sprayer is
grounded to prevent static sparking. The spray grounded through the electrical cord. If an extension cord is
necessary, the cord must be a grounded with three wires made for the appropriate voltage used.
•
Use a respirator or mask whenever there is a chance that vapors may be inhaled. Read all
instructions with the mask to ensure that the mask will provide the necessary protection
against the inhalation of harmful vapors.
•
Do not carry the turbine while spraying.
•
Keep the turbine at the maximum distance from the spraying area.
Summary of Contents for Mini-Mist PRO Deluxe T100
Page 12: ...12 8 Diagram ...
