RoadRunner HD™ | High Definition Mobile Recorder
33
Selecting
DHCP
from the Type and selecting
Apply
button reads the current IP address of the Recorder configured
by DHCP (Dynamic Host Configuration Protocol) network.
Select
Auto
(Default) to toggle between On and Off. When it is On, the Recorder will obtain the IP address of the DNS
server automatically.
NOTE: Selecting
Auto
will only be enabled when the Recorder is configured for DHCP network.
FEN
PATH: Network menu > FEN
Select
Use FEN
to toggle between On and Off.
NOTE: FEN is the technology that automatically sets up Recorder to work seamlessly for remote viewing via
the network internet connection. For FEN to work, naming the Recorder will be required.
Select the box beside
FEN Server
enter the IP address or domain name of the FEN server.
NOTE: Obtain the IP Address or domain name of the FEN Server from the network administrator.
Use the domain name instead of IP address if already set up the DNS Server.
Select the box beside
Port
and set the port number of the FEN server using the
Up
and
Down
arrow buttons to increase
or decrease the numbers. Select the keyboard symbol
to change the settings. The factory default port setting is 10088.
Select the box beside
FEN Name
and enter the Recorder name to be registered on the FEN server.
Select the
Check
box to check whether or not the name entered can be used.
Summary of Contents for RoadRunner HD
Page 1: ......
Page 2: ......
Page 6: ...User Guide and Instruction Manual iv...
