background image

 

                                 

 

 

17 

 

Battery pack specific warranty conditions 

The battery pack is guaranteed over the warranty period to provide a minimum of 500 charging 

cycles and to hold at least 60% of its nominal battery capacity.   

 

This  is  dependent  upon  the  correct  use,  regular  re-charging,  correct  preparation  for  storage 

and 

storage (as detailed in the BATTLE Owner‟s Manual).   

Halfords will be able to confirm the exact number of charge cycles and whether the battery has 

been  correctly  charged  /  stored  from  the  information  that  is  recorded  in  the  battery  pack 

monitoring and control electronic circuit. 

 

Information on Waste Disposal for Consumers of Electrical & Electronic Equipment

   

This  mark  on  a  product  and/or  accompanying  documents  indicates  that  when  it  is  to  be 

disposed of, it must be treated as Waste Electrical & Electronic Equipment (WEEE).   

Any WEEE marked waste products must not be mixed with general household waste, but 

kept separate for the treatment, recovery and recycling of the materials used. 

For proper treatment, recovery and recycling; please take all WEEE marked waste to your 

Local Authority Civic waste site, where it will be accepted free of charge. 

If  all  consumers  dispose  of  Waste  Electrical  &  Electronic  Equipment  correctly,  they  will  be 

helping to save valuable resources and preventing any potential negative effects upon human 

health and the environment, of any hazardous materials that the waste may contain.   

 

Please recycle your spent batteries.   

Batteries should not be disposed of in unsorted municipal waste, but separately collected 

to facilitate the correct treatment and recycling of the substances they contain. The 

recycling of batteries ensures the recovery of these valuable materials and prevents any 

potentially harmful effects upon both the environment and human health. 

Please contribute to battery recycling by segregating all spent batteries and actively 

participating in their collection and recycling. Various battery collection schemes will be in 

operation in different areas of the country. However, battery collection bins will be available at 

retail stores that sell batteries as well as at schools, libraries and other public buildings.   

Summary of Contents for Transport Folding-E Front Motor Drive System



















Reviews: