Apollo XPander XPA-IN-14011-APO, Commissioning Manual

© Apollo Fire Detectors Limited 2015

4

XPander detectors are supplied with a mounting base as a complete unit. The range comprises of the following 
products: 

Description

Part Number

Optical detector with base

XPA-CB-12034-APO

Heat detector A1R and base

XPA-CB-11170-APO

Heat detector CS and base

XPA-CB-11171-APO

Combined sounder and optical smoke detector

XPA-CB-14016-APO

Combined sounder and heat detector (class A1R)

XPA-CB-14017-APO

Combined sounder and heat detector (class CS)

XPA-CB-14018-APO

Combined sounder-visual indicator (red) and optical smoke detector

XPA-CB-14020-APO

Combined sounder-visual indicator (red) and heat detector (class A1R)

XPA-CB-14021-APO

Combined sounder-visual indicator (red) and heat detector (class CS)

XPA-CB-14022-APO

Combined sounder-visual indicator (clear) and optical smoke detector

XPA-CB-14024-APO

Combined sounder-visual indicator (clear) and heat detector (class A1R)

XPA-CB-14025-APO

Combined sounder-visual indicator (clear) and heat detector (class CS)

XPA-CB-14026-APO

Manual call point

XPA-MC-14006-APO

Red sounder with mounting base

XPA-CB-14001-APO

White sounder with mounting base

XPA-CB-14002-APO

Red sounder visual indicator with red mounting base

XPA-CB-14003-APO

Amber sounder visual indicator with white mounting base

XPA-CB-14004-APO

Clear sounder visual indicator with white sounder mounting base

XPA-CB-14005-APO

Site Survey Kit

XPA-TE-14075-APO

Single input/output unit

XPA-IN-14011-APO

Dual input/output unit

XPA-IN-14012-APO

Diversity Loop Interface

XPA-IN-14050-APO

White XPander XPERT card

29600-413

Red XPander XPERT card

29600-399

For spare parts/replacement parts see page 15.

Environmental

All packaging recyclable. 
Disposing of batteries should be in accordance with local regulations.

Handling precautions

As with all electronics, care should be taken during handling. Avoid dropping any of the parts onto hard surfaces, 
as damage may occur to the case and internal circuitry. 

All products should be kept in their packaging until they are due to be installed to minimise the risk of damage. 
Retain all packaging until the installation and commissioning is complete.

Observe anti-static precautions when handling all products. To avoid risk of static discharges do not place static-
sensitive devices on plastic surfaces.