© Apollo Fire Detectors Limited 2015
6
Menu
Device
Address
Currently Used (5.1)
Auto Select (5.2)
Manual Select (5.3)
Fault Status (4.1)
Background Level (4.2)
Fast Test (4.3)
Ident (4.4)
Fault Status (1.1)
Alarm Status (1.2)
Battery Level (1.3)
Signal Level (1.4)
Manual Update (1.5)
Ident (1.6)
Device Status (1.0)
Add New Device (2.0)
Remove Device (3.0)
Interface Status (4.0)
Radio Channels (5.0)
Installation
Installation should be carried out in accordance with the radio survey and system design. Siting of the devices
should be in strict accordance with the survey. Failure to do so could result in loss of performance.
The log on procedure (page 8) along with a completed site survey sheet should be sufficient to obtain a stable
working system, the site survey procedure ensures all XPander devices will communicate correctly once installed.
These sheets need to be completed and kept as commissioning and user documentation to comply with BS5839 -
1 section 2-27 and section 5-39 & 40
This guide provides information on features designed to help commission and troubleshoot a system.
Please note: Should building structure change, the site survey will need to be repeated. The system will not
comply to BS 5839 or other national codes if the site survey is not carried out properly and all supporting paper-
work completed (site survey sheet).
Menu - scrolling and selecting
Selecting Menu Options
A rotary select switch is used for scrolling through the menu and selecting an option. Turn the select switch clock-
wise to scroll down the menu. Turn the switch anti-clockwise to scroll back up the menu. Press the select switch
once to select an option.
The ‘Back’ button is used to return to the previous menu.
If a menu is selected and no further activity is detected, the menu will ‘time out’ and the interface will return to
normal operating mode.
Loop Interface PCB.
TX
RADIO
WD
RESET
HELP
RX
ON
1 2 3 4 5 6 7 8
BACK
POWER
FAULT
ISOLATE
0V
RX
TX
3V
SCR
+
-
LOOP IN
SCR
LOOP OUT
+
-
1 2 3 4 5 6 7
Front Lid
Tamper Switch
8 Way loop
Address Switch
Reset
Button
868 MHz Aerial
Connections
Status
LEDs
Help
Button
Rotary
Control
Back
Button
LCD
Screen
Loop In, Out and
Screen Connections
LCD Contrast
Adjustment
Summary of Contents for XPander XPA-IN-14011-APO
Page 1: ...Commissioning guide ...
Page 19: ...PP2286 2015 Issue 11 ...
