background image

                                                                         

                      

h t t p : / / w w w . a p o s -t e c . c o m

 

 

-  - 

1.

 

Introduction 

1.1

 

Overview 

The APOS  Bluetooth GPS-626 receiver is a Global Positioning System Receiver with 

Bluetooth wireless  technology.  This  wireless GPS receiver allows you to receive GPS data on 

mobile handheld wirelessly. By sending GPS position data over Bluetooth, you can position the 

receiver for the best possible reception all without wires. The advent of wireless GPS receiver  is 

becoming the next generation of GPS receivers. 

The APOS Wireless GPS receiver integrates Bluetooth module into GPS device. It shows 

the high performance, low power consumption, easily portable,  rechargeable & removable battery 

function and wireless data transmission. If you have a Pocket PC or other portable devices enabled 

with Bluetooth function, you can take advantage of your device’s Bluetooth  capability to wirelessly 

add GPS positioning technology. When you choose suitable navigation software, you can apply to 

personal, vehicle tracking, and marine navigation.   

If you use this wireless GPS receiver, you will ignore the messy cords and antenna and add 

the portability of your Pocket PC. In  addition, this wireless GPS receiver can change the exhausted 

battery to full battery like battery of mobile phone. 

1.2  Main Features 

u

 New SiRF Star III technology 

u

 20 Channels “All-In-View” Tracking 

u

 Position accuracy of 10 meters 2D RMS 

u

 Cold/Warm/Hot Start Time: 42/38/1 Seconds 

u

 Reacquisition Time: 0.1 seconds 

u

 RF connector for external GPS antenna 

u

 Support Standard NMEA-0183 

Summary of Contents for GPS-626











Reviews: