Who We Are
13. Take out two Apostle EtOH plates.
11. Place the Sample Plate on the plate holder 1 in
the instrument through the plate-loading window.
Make sure that the plate is placed steadily in the
correct orientation.
Ensure that the A1 well is in
the upper right corner of the plate holder on
turntable.
(Figure 5)
12. Press the [Plate position 2] button on the
screen.
15. Place one Apostle EtOH Plate on plate holder
2 in the instrument through the plate-loading
window.
Ensure
A1 well is in the upper right corner.
14. Peel off the protection film on one Apostle
EtOH Plate. (Figure 6)
16. Press the [Plate position 3] button on the
screen.
17. Peel off the protection film on the other
Apostle EtOH Plate.
Figure 5
18. Place the Apostle EtOH Plate on plate holder
3 in the instrument through the plate-loading
window.
Ensure
A1 well is in the upper right corner.
Figure 7
19. Press the [Plate position 4] button on the
screen.
05
>
Figure 6
>
20. Take out the Apostle Elution Plate.
21. Stick the sample barcode onto the Elution
Plate. (Figure 7)
>