7-2
ENSTROM 480B RFM SUPPLEMENT
Report No. 28-AC-067
Mar 16/18
7-2. Operation
NOTE
The Vision 1000 does not require flight crew
interface during aircraft operation.
NOTE
During low light operations, the quality of
images may be reduced.
NOTE
It may be necessary to reconfigure the Vision
1000 if it is bumped.
Memory Card – To Insert (refer to Figure 7-1)
1.
Open the access door on the Vision 1000.
2. Ensure proper orientation of the SD memory card and
insert; push in to secure.
3. Check the status of the LED. Refer to Table 7-1 for
possible LED status indications.
4. Close the Vision 1000 access door.
Data Retrieval
1.
Refer to Appareo Systems
Vision 1000 Configuration
Overview
, document number 600890-000009, for
instructions regarding flight data management.
Configuring Vision 1000
1.
Notify an authorized maintenance facility if the Vision
1000 requires reconfiguration.
This electronic document is not linked to a subscription for revision control or distribution. Refer to the Optional Equipment
Supplement Publications Status link under the Technical Support Page of the Enstrom Helicopter website for the current revision
level of this Rotorcraft Flight Manual Supplement.
UNCONTROLLED COPY WHEN DOWNLOADED OR PRINTED
