Installation Manual
Rev: 1.2
Last Revised:
3/22/16
Document Number: 600840-000038
Page 8 of 9
To set the device to transmit in FCC Part 15.231(e) mode, use the API command string as
indicated
below in quotes (“ ”).
“iLPD433.send(“MyMessage”,9,
FCC_PERIODIC_15_231_E,suggestedRetryIntervalMS,100,actualSentPowerDBM
);”
Otherwise in the above command, replace the argument
“FCC_PERIODIC_15_231_E” with
“
FCC_APERIODIC_15_231_AD
” for 15.231(a-d) mode with the appropriate control message
setup.
4.
CONFIGURATION
With equipment installed, final configuration must meet the minimum separation distance in
Table 5 and Section 4.2.
4.1. GATEWAY SYSTEM SEPARATION DISTANCES
Operator
Gateway
Antenna Hub 1, 2
(Recommended minimum
spacing between antenna
hubs is 7.5 cm)
40 cm (USA)
60 cm (Canada)
20 cm
Gateway
20 cm
N/A
Table 5 Separation Distance
